HURRISAFE 9050 is a concentrated wate- based readily biodegradable, non-flammable, non-chlorinated, industrial degreaser for use in heated immersion tanks, dip tanks, andultrasonic machines to clean and degrease parts. HURRISAFE 9050 does not contain sodium or potassium hydroxides and is, therefore, not corrosive to skin or soft metals.
HURRISAFE ADVANTAGES: 1. Use in heated immersion tanks, spray cabinet washers, ultrasonic degreaser, and heated dip tanks.
2. Exceptional heavy-dutycleaning performance due to state-of-the-art chemistry and exceptionally high concentration
3.Non-flammable, non-combustible, no flash point
4. Compatible with nearly all metals and plastics. 5. Dilutable with water to tailor performance to soil type, amount, and to optimize economics.
HURRISAFE 9050is designed to be heated from 135 ° to 190°F. IMPORTANT for agitated, pressure spray units the temperature must be at 135 °F or higher for the defoamer to be effective. DILUTION:The dilution ranges from 2% to 35% depending on the severity of the cleaning problem and the method of application.
RINSING:Is optional and dependent on the cleaning process adapted by the user.
DRYING: Drying can be accomplished by forced air heat, air knives ordrying ovens dependent on the cleaning process adapted by the user.
GENERAL DILUTIONS
25% solution is recommended for Heated Immersion Tanks without agitation. 10% solution is recommended for Heated Immersion Tanks with agitation a 20% to 35% solution is recommended for Ultrasonic Degreaser
SAFETY:
Rubber gloves are recommended to prevent drying of the skin.Goggles should be worn if splashing is expected.
