HURRISAFE 9040 SPECIAL FORMULA
INDUSTRIAL FLOOR CLEANER PROCEDURES
HURRISAFE is a concentrated water based, biodegradable, non-flammable, non-chlorinated, industrial floor cleaner and general purpose degreaser that has no harmful fumes, and contains no EPA-reportable materials (SARA, HAPs, etc.) Unlike most floor cleaning products HURRISAFE 9040 does not contain sodium/potassium hydroxide and is, therefore, not corrosive to skin or soft metals. Hurrisafe 9040 effectively removes dirt, dust, shop soils, tire marks, many uncured paints and coatings, grease, and a broad range of petroleum oils from a variety of surfaces. For floor cleaning Hurrisafe 9040 may be used in either manual mopping applications or in an automated floor scrubber.
HURRISAFE ADVANTAGES:
1. Exceptional heavy-duty cleaning performance due to state-of-the-art chemistry and
exceptionally high concentration.
2. Readily Biodegradable per EPA 40CFR796.3200 (>60% degradation in ten day BOD
test).
3. Used cleaner is ideal for use in Oil-Water Separator.
4. Non-flammable, non-combustible, no flash point.
5. Improved worker safety due to dramatically reduced inhalation and skin exposure
effects (contains no sodium hydroxide or potassium hydroxide).
6. Compatible with nearly all metals and plastics.
7. Dilute with water to tailor performance to soil types and amount, and to optimize
economics.
COMPATIBILITY:
HURRISAFE 9040 is compatible with nearly all flooring surfaces, including tile, concrete,
metal and asphalt. It is non-corrosive to virtually all metals, including mild steel, aluminum,
copper and brass that it comes in contact.
FLOOR CLEANING:
Manual Mopping: Follow normal procedures for manual mopping. Removal of difficult
soils can be greatly enhanced by allowing the cleaning solution to soak on the soiled area
for 3 to 5 minutes. Do not allow to dry before mopping up excess.
DIRECTIONS: RECOMMENDED DILUTION FOR MOPPING
Soil Type Dilution With Water
Light Soils: 12-ounces of Hurrisafe to 116 Ounces of Water to = 1 Gallon
Medium Soils: 20-ounces of Hurrisafe to 108 Ounces of Water to = 1 Gallon
Heavy Soils: 32-ounces of Hurrisafe to 96 Ounces of Water to = 1 Gallon
Automated Floor Scrubber: Dilute Hurrisafe, add to machine and follow the directions provided by the manufacturer for operation instructions.
DIRECTIONS: RECOMMENDED DILUTION FOR AUTOMATIC FLOOR CLEANERS
Hurrisafe to Water
Light Soils: 1 - 3%; light oil, dirt
Medium Soils: 5 - 10%; heavy oil, tire marks, heel
marks)
Heavy Soils: 10-50% grease, oils and tire marks
SAFETY:
Rubber gloves are recommended to prevent drying of the skin. Goggles should be worn if splashing is expected.
DISPOSAL:
Spent HURRISAFE solution is disposed of through a wastewater treatment company or through sewer discharge to a local POTW, depending on local water discharge limitations. HURRISAFE 9040 is a non-hazardous waste, and is readily biodegradable by the EPA definition; however, the soils added to the HURRISAFE 9040 solution might change the waste characterization. The same reasoning holds for waste rags. They are only a hazardous waste if the removed soil is itself a hazardous waste.
|
