TEC - 50 is a liquid formula that is non-flammable, non-explosive odor-free with no fumes.
TEC - 50 quickly and effectively removes scale deposits and oxidation from various surfaces
TEC - 50 is safe to use on metals, including steel, copper, and bronze.
TEC - 50 removes stains and accumulated deposits without harming under surface of wood, tile, glass, brick, and vitreous china, marble and plastic.
EASY TO USE
TEC-50 is a concentrated product that is designed to be used full strength or diluted with water, and used in either cold or heated applications.
DIRECTIONS
For small surfaces use TEC-50:With a clean cloth, stiff brush or sponges to area to be cleaned.RINSING: a through 5-minute water rinsing after each application to stop the aaction
must follow after all cleaning application. For Large surfaces use TEC-50 : In either a cold or heated immersion tanks, dip tank or low pressure spray? up to 160 °F. follow by a clean water rinse and dry. To Flush Lines:to remove scale or sediment from water or chemical lines flush TEC-50 through the lines using low-pressure spray followed by a clean water rinse.
Hard to Reach Areas: Where severe deposits have formed, spray concentrated TEC - 50 on to the soiled area using alow-pressure sprayer.Allow the solution to penetrate through and loosen the soil.Continue spraying the soiled area until all the scale deposits are removed.Follow by rinsing and drying the cleaned surface.
Dilutions for Use:
Light Scale deposits dilute TEC 50 one part cleaner to three parts water for a 25% solution. Medium Scale deposits dilute TEC 50 one part cleaner to two parts water for a 33% solution.
Heavy Soils and Scale deposits dilute TEC50 one part cleaner to one part water oruse full- immersion tank. RUST: TEC-50 will not prevent rust from forming; therefore, treated surfaces must be finished or protected from rust with a rust inhibitor or protective coating solution. CAUTION:Harmful if swallowed, but if you do, drink large amounts of water and get medical attention.Avoid getting solution in eyes if you do, flush eyes with running water.If irritation persists, get medical attention. May cause irritation of skin in prolonged use without gloves.It is recommended that rubber gloves be worn,